WH0142-2(16X2)

WH0142-2(16X2)

Product Overview

WH0142-2(16X2) is an ultra-thin, edge-driven potentiometer featuring a flat dial design with the edge exposed. It is specially designed for miniature portable electronic products where space is extremely limited. This product replaces the traditional rotating shaft of a rotary potentiometer with a horizontally extended flat plastic disc; after installation, the edge of the disc protrudes from the device’s housing. Users can adjust the resistance value by flicking the edge of the disc, providing excellent tactile feedback even when operated blindly. The resistor element typically employs a carbon film structure, with a thickness of only 2mm to 4mm, achieving an exceptionally high degree of height-space compression. It perfectly fits into portable electronic enclosures with stringent thickness requirements while also meeting the biocompatibility and miniaturization standards of medical-grade hearing aids, helping reduce product volume by up to 20% and enhancing wearing comfort.

Operating Principle

This potentiometer is based on the core principle of rotary potentiometers, replacing the conventional long rotating shaft with a horizontally extended flat plastic disc. Once installed, the edge of the disc protrudes from the device’s housing. Users do not need to see the potentiometer itself—by simply flicking the edge of the disc with their fingers, they can move the internal sliding contact along the resistor element, precisely adjusting the resistance value. This design eliminates the traditional long shaft that extends outward, achieving both resistance adjustment and maximum height-space reduction, while delivering convenient blind operation.

Key Performance Parameters

1. Resistor Material: Carbon Film
2. Product Thickness: 2mm–4mm, with a minimum thickness of less than 2mm
3. Standard Resistance Value: 10kΩ
4. Rated Power: 0.05W
5. Physical Dimensions: Minimum diameter of 10mm, thickness of 2mm
6. Compliance Standards: Meets biocompatibility requirements for medical-grade hearing aids

Core Advantages

1. Ultra-Thin Design: With a thickness of only 2mm–4mm, and a minimum of less than 2mm, this product achieves an extremely high level of height-space compression, easily fitting into portable electronic enclosures with strict thickness constraints. It solves the problem of traditional long-shaft potentiometers being unable to adapt to ultra-thin devices.
2. Excellent Blind Operation Experience: Featuring an edge-exposed flat dial design, users can adjust resistance values simply by flicking the disc’s edge without needing to look at it, making operation highly convenient—especially suitable for devices worn on the ear or carried in pockets.
3. Medical-Grade Compliance: Meeting biocompatibility requirements for medical-grade hearing aids, it can be safely used in hearing aids and other close-fitting medical electronic devices, ensuring user safety.
4. Supports Product Miniaturization: With a minimum physical size of 10mm in diameter and 2mm thick, it helps reduce product volume by up to 20%, effectively improving the wearing comfort and portability of portable devices.
5. Stable and Durable Performance: The carbon film resistor structure is stable, with a rated power of 0.05W, satisfying the low-power adjustment needs of miniature electronic devices and ensuring reliable long-term performance.

Core Value of the Product

1. Its ultra-thin structure breaks through spatial limitations, enabling ultra-thin industrial designs for miniature portable electronics without requiring extra height space for the potentiometer.
2. The blind-operation design enhances user experience, particularly for devices like hearing aids and in-ear headphones that cannot be operated visually, making control more convenient.
3. Medical-grade compliance ensures safe application, allowing direct integration into close-fitting medical devices such as hearing aids without additional compliance testing.
4. By reducing product volume by up to 20%, it improves the wearing comfort and portability of portable devices, boosting market competitiveness.

Target Customer Groups

Hearing aid manufacturers, portable pocket radio producers, handheld gaming peripheral suppliers, over-ear headphone makers, and other companies focused on developing and producing miniature ultra-thin electronic devices. These enterprises generally face strict height-space constraints while demanding ease of operation and high compliance standards. This potentiometer perfectly aligns with their product design needs.

Application Scenarios

Specifically designed for miniature ultra-thin electronic devices, this potentiometer is primarily used in the following scenarios: adjusting the volume of behind-the-ear hearing aids by embedding its ultra-thin structure within the hearing aid housing, allowing users to conveniently regulate volume through blind operation; controlling the volume of in-ear wired headphones, adapting to the ultra-thin design of the headphone cable so users can easily adjust volume while wearing them; fine-tuning the backlight brightness of retro handheld game consoles, embedded within the console’s ultra-thin body, enabling users to adjust backlight intensity according to ambient lighting conditions and enhance their overall experience. Additionally, it can be applied to other miniature electronic products with limited height space that require blind operation for adjustment.

Solutions to Industry Pain Points

In the research and production of miniature portable and ultra-thin electronic devices, the long-shaft structure of traditional rotary potentiometers has long been a major design challenge: the protruding shaft cannot fit into ultra-thin housings, forcing installation that compromises the overall design and may even render the device unportable. WH0142-2(16X2), however, perfectly resolves this issue. With its flat dial edge-driven design, it completely eliminates the long-shaft structure, compressing the height to just 2mm–4mm and fulfilling the “hidden” and “edge-sliding” industrial design requirements of these devices. Meanwhile, its blind-operation design addresses the difficulty users face when operating close-fitting, portable devices without visual access, and its medical-grade compliance tackles the safety adaptation challenges of hearing aids and other medical devices, comprehensively meeting the design and usage needs of miniature ultra-thin electronic products.

Common Questions FAQ

Q1: What is the thickness range of the WH0142-2(16X2) potentiometer?
A: The typical thickness of this potentiometer is 2mm–4mm, with a minimum thickness of less than 2mm, satisfying the space requirements of most ultra-thin electronic devices.
Q2: Is this potentiometer suitable for use in hearing aids?
A: Yes, it meets the biocompatibility and miniaturization requirements of medical-grade hearing aids, making it safe for use in adjusting the volume of behind-the-ear hearing aids and helping reduce their volume by up to 20% while improving wearing comfort.
Q3: How do users operate this potentiometer?
A: After installation, the edge of the flat dial protrudes from the device’s housing. Users do not need to look directly at it—simply flick the edge of the disc with their fingers to adjust the resistance value, providing excellent tactile feedback during blind operation.
Q4: What is the standard resistance value of this potentiometer?
A: The standard resistance value is 10kΩ, with a rated power of 0.05W, sufficient to meet the low-power adjustment needs of miniature electronic devices.